Công tắc áp suất 2 tiếp điểm System Sensor EPS10-2

Trình duyệt của bạn đã tắt chức năng hỗ trợ JavaScript.
Website chỉ làm việc khi bạn bật nó trở lại.
Để tham khảo cách bật JavaScript, hãy click chuột vào đây!

Danh mục sản phẩm

Công tắc áp suất 2 tiếp điểm System Sensor EPS10-2
Mã sản phẩm: SYSTEM SENSOR EPS10-2
Giá bán: Liên hệ
Xuất xứ:
Brand:
Công tắc áp suất System Sensor EPS10-2
Thông số kỹ thuật
Mã sản phẩm : EPS10-2
Thương hiệu : SYSTEM SENSOR
Xuất xứ : Trung Quốc
Adjustment Pressure Range : 4-20 PSI
Contact Ratings : Two sets SPDT (Form C); 10.0A, 1/2 HP @ 125/250VAC; 2.5A @ 6/12/24VDC
Differential : Approx. 3 PSI throughout range
Enclosure Rating : UL NEMA 4
Factory Setting : Operates at rising pressure 4-8 PSI
Operating Temperature Range : -40°F to 160°F (-40°C to 71°C)
Overall Dimensions : 5.12"H x 3.325"W x 4.25"L (13cm x 8.4cm x 10.8cm)
Pressure Connection : 1/2" NPT male glass reinforced nylon
Shipping Weight : 1.2 lbs. (.54 kg)
UL Pressure Rating : 250 PSI
Warranty : 3 years

Xuất xứ

TRUNG QUỐC

Brand

System Sensor / Mỹ

Tư vấn Online

CÔNG TẮC ÁP SUẤT 2 TIẾP ĐIỂM SYSTEM SENSOR EPS10-2
The EPS10-1 has a single SPDT switch while the EPS10-2 model contains two SPDT switches. The EPS10 Series features field adjustable pressure sensitivity to provide an alarm response between 4 and 20 psi. It is factory set to respond at 4 – 8 psi on rising or falling pressure. The pressure adjustment wheel requires no special tools and does not affect switch synchronization on the EPS10-2. The EPS10 Series switches are NEMA 4 rated
Thông số kỷ thuật
Mã sản phẩm : EPS10-2
Thương hiệu : SYSTEM SENSOR
Xuất xứ : Trung Quốc
Adjustment Pressure Range : 4-20 PSI
Contact Ratings : Two sets SPDT (Form C); 10.0A, 1/2 HP @ 125/250VAC; 2.5A @ 6/12/24VDC
Differential : Approx. 3 PSI throughout range
Enclosure Rating : UL NEMA 4
Factory Setting : Operates at rising pressure 4-8 PSI
Operating Temperature Range : -40°F to 160°F (-40°C to 71°C)
Overall Dimensions : 5.12"H x 3.325"W x 4.25"L (13cm x 8.4cm x 10.8cm)
Pressure Connection : 1/2" NPT male glass reinforced nylon
Shipping Weight : 1.2 lbs. (.54 kg)
UL Pressure Rating : 250 PSI
Warranty : 3 years
Architectural/Engineering Specifications EPS10-1 (SPDT), EPS10-2 (2/SPDT)
Model shall be an EPS10-1 or EPS10-2 pressure type waterflow switch as manufactured by System Sensor of St. Charles, IL. They shall be installed on the sprinkler system with connection as shown on the drawings and/or as specified herein. Pressure switches shall be of the bellows-activated type. Switches shall have a maximum service pressure rating of 300 psi and shall be factory adjusted to operate at a pressure of 4 – 8 psi. There shall be one (1) or two (2) SPDT contacts rated at 10.0 Amp @ 125/250 VAC and 2.5 Amp @ 6/12/24 VDC. The contractor shall furnish and install, where indicated on the plans, pressure switches according to appropriate NFPA standards. Switches shall be provided with a ½˝ NPT male pressure connection to be connected to the alarm check valve of a “wet” sprinkler system, into the intermediate chamber of a “dry” system, or to a pre-action or deluge valve. They shall be activated by any flow of water equal to or in excess of the discharge from one sprinkler head. Switches shall provide 1 knockout type and 1 open hole for ½˝ conduit fitting attachment and a ground screw provision for electrical grounding. The switch enclosure shall be weatherproof and carry a UL 4x/NEMA 4 rating when used with proper electrical fittings and conduit. The cover shall incorporate tamper-resistant screws. The unit shall be listed by Underwriters Laboratories, Inc. and approved by Factory Mutual.

Ý kiến bạn đọc

Bạn cần đăng nhập với tư cách là Thành viên chính thức để có thể bình luận