Hệ thống báo cháy tự động và bán tự động (499 sản phẩm)

Đế đầu báo khói thông thường Hochiki NS6-100 là đế không có thiết bị điện tử, hai dây, 6" có chốt khóa bằng nhựa. Mỗi đế được trang bị một điện trở. Nó có dòng điện báo động là 150mA @ 15,0 – 33,0V MAX). Đế đầu báo khói thông thường Hochiki NS6-100 NS được thiết kế riêng để sử dụng với đầu báo khói thông thường HOCHIKI.

Đầu dò khói Beam động cơ từ 8 đến 100m (bộ điều khiển + Đầu dò Beam + 1 Gương) COFEM DLR100M
Thông số kỷ thuật
Bariera optica de fum motorizata cu auto-aliniere cu receptor
Emitator in aceeasi carcasa utilizata impreuna cu FIRERAY5000/100 atunci cand e nevoie de mai mult de o bariera
Accepta monitorizeaza si controleaza maxim 4 bariere de fum , 4 prisme reflective
Distanta 8-100 m
Aliniere laser asistata
Compensarea contaminarii
Lungimea de unda optica: 850 nm
Temperatura de functionare: de la -10 pana la +55 grade Celsius
Temperatura de depozitare: de la -40 pana la +85 grade Celsius
Umiditate relativa: 93% (fara condens)
Punctaj IP: 54
Lungime cablu - de la controler-ul de sistem la detector (2 perechi de fire, ecranat, rezistent la foc): 100 m
Nivel avarie/ intunecare rapida: 87%
Alinierea unghiulara maxima: ±3.5 Grade
Abaterea de aliniere unghiulara maxima a detectorului fata de axa optica: ±0.3 Grade
Abaterea de aliniere unghiulara maxima a reflectorului fata de axa optica: ±5 Grade
Distanta de functionare (separare) *: 8 - 100 m
Intarziere pana la avarie - setabila de catre utilizator (prestabilita 10 sec): 2 - 30 sec
Intarziere pana la alarma - setabila de catre utilizator (prestabilita 10 sec): 2 - 30 sec
Curent de lucru - mod curent slab: max 12 mA
Centrala inclusa
4 prisme de reflexie incluse
Bariera optica de fum inclusa
Curent de lucru - mod curent inalt: max 52 mA

Đầu dò khói Beam động cơ từ 8 đến 50m (bộ điều khiển + Đầu dò Beam + 1 Gương) COFEM DLR50M
Thông số kỷ thuật
Bariera optica de fum motorizata cu auto-aliniere cu receptor
Emitator in aceeasi carcasa utilizata impreuna cu FIRERAY5000/100 atunci cand e nevoie de mai mult de o bariera
1 prisma reflectiva
Distanta 8-50 m
Aliniere laser asistata
Compensarea contaminarii
Lungimea de unda optica: 850 nm
Temperatura de functionare: de la -10 pana la +55 grade Celsius
Temperatura de depozitare: de la -40 pana la +85 grade Celsius
Umiditate relativa: 93% (fara condens)
Punctaj IP: 54
Lungime cablu - de la controler-ul de sistem la detector (2 perechi de fire, ecranat, rezistent la foc): 100 m
Nivel avarie/ intunecare rapida: 87%
Alinierea unghiulara maxima: ±3.5 Grade
Abaterea de aliniere unghiulara maxima a detectorului fata de axa optica: ±0.3 Grade
Abaterea de aliniere unghiulara maxima a reflectorului fata de axa optica: ±5 Grade
Distanta de functionare (separare) *: 8 - 50 m
Intarziere pana la avarie - setabila de catre utilizator (prestabilita 10 sec): 2 - 30 sec
Intarziere pana la alarma - setabila de catre utilizator (prestabilita 10 sec): 2 - 30 sec
Curent de lucru - mod curent slab: max 12 mA
Curent de lucru - mod curent inalt: max 52 mA

Đầu dò khói Beam (50-100m) COFEM DLR100Z
Thông số kỷ thuật
Tensiune de alimentare: 12 - 24V
Curent in alarma: 14mA
Iesire: incendiu NO/NC contact (2A/30V); defectiune NO/NC contact (2A/30V)
Dimensiuni reduse
Temperatura de functionare: de la -30 pana la +55 grade Celsius
Nivele de sensibilitate selectabile
Autoverificare si compensare automata
Constructie robusta
Carcasa ABS rezistenta la ardere
Culoare gri/negru
Dimensiune: 210x117x120
Grad protectie carcasa: IP50
Consum redus
Corespunde standardelor
BS5839 part 5 si EN 54, UL si Vds

Đầu dò khói Beam (5-50m) COFEM DLR50Z
Thông số kỷ thuật
Tensiune de alimentare: 12 - 24V
Curent in alarma: 14mA
Iesire: incendiu NO/NC contact (2A/30V); defectiune NO/NC contact (2A/30V)
Dimensiuni reduse
Temperatura de functionare: de la -30 pana la +55 grade Celsius
Nivele de sensibilitate selectabile
Autoverificare si compensare automata
Constructie robusta
Carcasa ABS rezistenta la ardere
Culoare gri/negru
Dimensiune: 210x117x120
Grad protectie carcasa: IP50
Consum redus
Corespunde standardelor
BS5839 part 5 si EN 54, UL si Vds

Module 8 Relay không điện áp COFEM MDL-8
Description
Relay module simple for fire detection system.
This module consists of a relay that controls the output of a dry contact normally open (NO) normally closed (NC), unsupervised.
That provision allows you to control as typical application door electromagnets in conventional fire detection systems, either through the control panel supply or sources of external power supply (FAE).
The equipment is very simple and easy to install.
The board of the relay module is mounted on a plastic base, which carries some tapes that allow secure comfortably in the place that best suits, taking advantage of the available space in stations, power supplies (FAE), etc, according to the normal distribution of the wiring of the installation.
In addition, the relay module contains a safety fuse on the side of the dry contact.
There are three versions of modules based on the number of relays contained on the base:
• MDL1R: 1 relay module.
• MDL2R: 2 relays module.
• MDL-8: 8 relays module
Features
• Relay with dry contact output NO-NC, not supervised.
• Simple installation by means of adhesive tapes, taking advantage of the space and following the normal distribution wiring.
• It contains safety fuse.

Module 2 Relay không điện áp COFEM MDL2R
Description
Relay module simple for fire detection system.
This module consists of a relay that controls the output of a dry contact normally open (NO) normally closed (NC), unsupervised.
That provision allows you to control as typical application door electromagnets in conventional fire detection systems, either through the control panel supply or sources of external power supply (FAE).
The equipment is very simple and easy to install.
The board of the relay module is mounted on a plastic base, which carries some tapes that allow secure comfortably in the place that best suits, taking advantage of the available space in stations, power supplies (FAE), etc, according to the normal distribution of the wiring of the installation.
In addition, the relay module contains a safety fuse on the side of the dry contact.
There are three versions of modules based on the number of relays contained on the base:
• MDL1R: 1 relay module.
• MDL2R: 2 relays module.
• MDL-8: 8 relays module
Features
• Relay with dry contact output NO-NC, not supervised.
• Simple installation by means of adhesive tapes, taking advantage of the space and following the normal distribution wiring.
• It contains safety fuse.

Module 1 Relay không điện áp COFEM MDL1R
Description
Relay module simple for fire detection system.
This module consists of a relay that controls the output of a dry contact normally open (NO) normally closed (NC), unsupervised.
That provision allows you to control as typical application door electromagnets in conventional fire detection systems, either through the control panel supply or sources of external power supply (FAE).
The equipment is very simple and easy to install.
The board of the relay module is mounted on a plastic base, which carries some tapes that allow secure comfortably in the place that best suits, taking advantage of the available space in stations, power supplies (FAE), etc, according to the normal distribution of the wiring of the installation.
In addition, the relay module contains a safety fuse on the side of the dry contact.
There are three versions of modules based on the number of relays contained on the base:
• MDL1R: 1 relay module.
• MDL2R: 2 relays module.
• MDL-8: 8 relays module
Features
• Relay with dry contact output NO-NC, not supervised.
• Simple installation by means of adhesive tapes, taking advantage of the space and following the normal distribution wiring.
• It contains safety fuse.