Danh mục sản phẩm

Điều khiển từ xa kiểm tra tự động System Sensor RTS451 Điều khiển từ xa kiểm tra tự động System Sensor RTS451 Hệ thống cảm biến tự động điều khiển từ xa System Sensor RTS451
Thông số kỹ thuật:
Sản xuất theo công nghệ USA
Hãng sản xuất: System Sensor
Mã sản phẩm:
SYS-ST
Xuất xứ: Trung Quốc
Dimensions: 4.6″ H × 2.75″ W × 1.5″ D
Weight: .11 lbs.
Power Requirements:
 Alarm LED: 2.8 – 32 VDC, 7.5 mA max.
 Total Current: 105 mA max.
Test Switch: 10 VA @ 32 VDC
Reset Switch: 10 VA @ 32 VDC
Alarm Response Time: 40 sec. max.
Temperature: –10°C to 60°C (14°F to 140°F)
Humidity: 95% RH Non-condensing
Bảo hành 12 tháng.
System Sensor RTS451 Phụ kiện máy dò tự động Số lượng: 100 cái

Điều khiển từ xa kiểm tra tự động System Sensor RTS451

Tình trạng:
Hệ thống cảm biến tự động điều khiển từ xa System Sensor RTS451
Thông số kỹ thuật:
Sản xuất theo công nghệ USA
Hãng sản xuất: System Sensor
Mã sản phẩm:
SYS-ST
Xuất xứ: Trung Quốc
Dimensions: 4.6″ H × 2.75″ W × 1.5″ D
Weight: .11 lbs.
Power Requirements:
 Alarm LED: 2.8 – 32 VDC, 7.5 mA max.
 Total Current: 105 mA max.
Test Switch: 10 VA @ 32 VDC
Reset Switch: 10 VA @ 32 VDC
Alarm Response Time: 40 sec. max.
Temperature: –10°C to 60°C (14°F to 140°F)
Humidity: 95% RH Non-condensing
Bảo hành 12 tháng.
[Xem tiếp]
Chọn loại đặt mua
Chọn loại đặt mua
 

Gọi ngay 0912.124.679 để có được giá tốt nhất!

Điều khiển từ xa kiểm tra tự động System Sensor RTS451
System Sensor’s RTS451 is an automatic fire detector accessory designed to test a remotely located detector.
Consult detector installation instructions for additional information.
The National Fire Protection Association has published codes, standards, and recommended practices for the installation and use of the above product. It is recommended that the installer be familiar with these requirements, with local codes, and any special requirements of the local authority having jurisdiction.
Điều khiển kiểm tra từ xa cảm biến tự động System Sensor RTS451 1

Thông số kỷ thuật
Dimensions: 4.6″ H × 2.75″ W × 1.5″ D
Weight: .11 lbs.
Power Requirements:
 Alarm LED: 2.8 – 32 VDC, 7.5 mA max.
 Total Current: 105 mA max.
Test Switch: 10 VA @ 32 VDC
Reset Switch: 10 VA @ 32 VDC
Alarm Response Time: 40 sec. max.
Temperature: –10°C to 60°C (14°F to 140°F)
Humidity: 95% RH Non-condensing

  Ý kiến bạn đọc

 

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây